Wednesday, January 28, 2009


At first, I thought it was a coincidence, but it turns out it was all deliberate. This dog would come out from the park and then shit on the sidewalk. And not any kind of poop, but that smelly, sticky, yellow crap that only dogs seem able to manufacture. Then the dog would go back into the park, just far enough so that its presence would not be obvious, and it would watch. People would eventually step in the shit, all reacting to it in different ways. The ears of the dog would jump straight up, its eyes focused on the target, absorbing everything that happened.
He did that for three days in a row, so it couldn't have been a coincidence. However, when faced with the facts, they didn't seem so strange to me. Actually it makes perfect sense for predators to ambush their prey and learn from its behavior as much as possible. I admit, for a dog it was a pretty sick and smart thing to do, but it was all within reason. After all, I was doing the same thing, staking the man up, watching his every move, learning his habits.

I can remember the days when this filled me with excitement, the thrill of the hunt reverberating from some place deep inside my skull, but now I could only feel calm. Not boredom, though; boredom is dangerous, makes people sloppy, gets them hurt. I was missing a certain element, something that, in the past, made all this fun, but I couldn't quite find it now. That's why this was the last one. And only because it was necessary.

The guy showed up at exactly the time I was expecting him to do. Small time thug, acting cool while pretending to be larger than he was capable of ever being. I let him go up to his apartment, slightly amused at the concentrated look-around that he pretended to throw before entering the building. If he wouldn't have been pretending, he would have been able to notice me, watching him from a car for three days in a row. A different car, I admit, but who would be dumb enough to do it differently? Maybe the cops... and the guy was looking out for police presence, I guess. Unfortunately for him, I was no policeman.

I gave him 5 minutes to change his mind. Maybe he would feel the wrongness of the situation, maybe luck would be with him and make him leave for some reason. Maybe he would just grab a beer and drop in his big armchair, watching mind numbing TV shows, as I knew he would. Yet, I always like to allow for the unknown, for the unexplainable, makes it seem more real. Although, when doing this thing for a long time, one sees all kinds of shit and knows almost every way people react when stepping in it. I got out of my car.

I smashed the door lock with my foot and entered the room. Dirty, sloppy, typical bachelor room with a twinge of gangsta. What a dump! My guy froze for a second on his armchair, then, to my surprise, moved really fast and produced a revolver from underneath the small table next to him. He pointed it at me and shouted something along the lines of inquiring on my identity. Of course, a lot of "fuck" and "mudafucka" was involved, although that sounded a bit off coming from an oversized white guy.

I froze for a moment, too. A gun, who would have thought? I closed the door behind me, then turned to him and started telling him what had to be said. I did have three days to think it over in my head, after all.

"There is a saying", I calmly conversed, completely ignoring the vulgar threats coming from my target, " that every boy kills his father to become a man. Of course, it's a metaphor most of the time".

I waited for a reaction, watching how the feeling of control provided by the gun was slightly fading away. He decided to enforce it by standing up and aiming the gun at me from somewhere above his head, throwing profanities at me while doing so. Doesn't he know he can hurt his wrist by firing that way? Not to mention having almost no accuracy whatsoever.

"In other words, no man is complete without killing his father first, metaphorically speaking of course". It was almost hilarious; for a second, the guy thought I was talking about him and me. I could see on his face how he considered being my father or vice-versa. Well, at least not all of this will have been devoid of fun.

"Shut da fuck up, mudafucka! Who da fuck are you anyway? You escaped from some loony ... mental... "

I ignored him "However, it was you that actually killed my father. I therefore seem to be entitled to feel... incomplete.".
I could see the reaction right away. Killing one's father was a serious thing even for a brain dead thug. He knew he was in danger now, maybe he even felt guilty, even if he had no idea who my father was. He did take a step back and aimed the gun with both hands at me. Now, that was better. I could tell he was considering squeezing the trigger right then, but people are always too curious for their own good. He had to know how it plays out.

"I have decided to pursue my quest for completeness by killing you.", I then added, gently pushing him over the edge with a hard look. He fired.

There is something slightly poetic in having your own gun explode in your hands, killing you instantly with a stray piece of metal through the eye and brain. Of course, the cement in the barrel and the well planned weakening of the metal of the revolver cock would be obvious during the police investigation, but it would also be clear that the gun was unregistered and that the victim pulled the trigger voluntarily.

I didn't quite feel complete, though. He hadn't kill my father, either, so I guess it was to be expected, but I was sure he did kill someone's parent at some point in time, so I also expected a bit more gratification.

After all, it was a good call to stop doing this. No fun at all. Well, maybe not a complete stop, more like a sabbatical, to clear one's thoughts. I may never do it again.

Saturday, January 24, 2009

Monday, January 19, 2009

Seirei no Moribito - Guardian of the Sacred Spirit

the main characters in the story
Another pearl in the anime pond. One just has to dive and grab this fairy tale and watch it. Seirei no Moribito is the story of a female bodyguard, bound by honor and personal history to defend a child prince from the assassins sent by his father, the emperor. The anime is not really a fighting anime, though, no one battles for the sake of battle. More than that, the "ona yojimbo" has vowed to save lives, not take them, so she never kills anyone. All characters in the story are clearly drawn up, with their own particularities and personal motivations to do things and in the end, there is even a eco green moral. :)

My advice it to watch it, as it is both a beautiful story, as well as a complex one, fit for both adults and young children. Only 26 episodes, but it is worth it. I would really like to see animes for the rest of the books in the series. You can also read the first two chapters of the manga at Mangafox.

Friday, January 16, 2009

Including external javascript on async postbacks

Update: it has come to my attention that these kind of errors appear only when debug="true" in the web config. In production sites it might work regardless.

You want to programatically load a js in a user control. The user control becomes visible in the page only during async postbacks and it is hidden at page load. So you want to use some method of loading the external javascript file during that asynchronous UpdatePanel magic.

Use ScriptManager.RegisterClientScriptInclude. There is a catch, though. For each script that you want to include asynchronously, you must end it with
if (typeof (Sys) !== 'undefined') Sys.Application.notifyScriptLoaded();
else the Ajax.Net script loader will throw an error like: Microsoft JScript runtime error: Sys.ScriptLoadFailedException:
The script '...' failed to load. Check for:
Inaccessible path. Script errors. (IE) Enable 'Display a notification about every script error' under advanced settings.
Missing call to Sys.Application.notifyScriptLoaded().

For the aspx version, use the ScriptManagerProxy control:
    <asp:ScriptManagerProxy runat="server">
<asp:ScriptReference Path="~/js/myScript.js" NotifyScriptLoaded="true" />

Thursday, January 15, 2009

Dennou Coil - a pretty fun anime.

Dennou Coil is a cross between Ghost in the Shell and Tonari no Totoro. How can it be possible? Simple! First remove all that usual Japanese obsession with boys in high schools (you know, everything happends to some high school children, usually boys, all in the same class, maybe some opinionated women, they fight, they grow in "level", etc). Instead use girls in elementary school. Then move it in some future world where people merged the real world with the virtual, and add cute creatures like from Tonari no Totoro (and the girls) in the virtual world! Yatta! :)

Anyway, getting more serious now, the anime is really nice. The Augmented Reality concept is pretty cool and (even if towards the end it gets a little spiritual and unnecessarily action like) stays pretty consistent. Imagine wearing clear glasses that add to your usual display of reality information like virtual pets, virtual laptops, keyboards and displays, maps of your current location and so on.

The children are all drawn towards a strange phenomenon that adults seem to regard as fantasy, called Dennou Coil, where the consciousness of people gets transferred to a virtual nether world via the quantum circuits in the glasses.

Towards the end, adults try to confiscate the glasses from the children and, after a hearty discourse about how real things can be touched, I thought the whole cool idea of the series would be perverted towards some social goal of keeping children "real", but it was not so. You will have to watch the series to know what I mean :)

Bottom line: pretty interesting and captivating. A little too childish, but without resorting to silly behaviour or self referential comedy that I see so much lately in animes. The anime has only 26 episodes, with little chance of more. The manga itself is complete as well. Couldn't find the manga free online. If you know where to find it, leave me a comment.

Recommendation: watch it!

Wednesday, January 14, 2009

Session state is not available in the current context

So you did some work in an ASP.Net web site and then you decided to or to add the Ajax extensions to it or switch to ASP.Net 3.5 or whatever and suddenly you get Ajax errors like "Sys is undefined" or you don't see images and the css files are not loaded. And after googling like crazy and finding a zillion possible solutions you decide to enter in the browser address bar the url of the offending image, css file or even ScriptResource.axd files containing the ajax javascript and you see a beautiful ASP.Net error page displaying "Session state is not available in this context.". Huh?

There are some reasons why this might happen, but let's examine the one that actually prompted me to write the article. Someone made a change in global.asax, trying to work with Session there, more precisely in the Application_AcquireRequestState event. The error was returned by the Session property of the HttpApplication object, the one that the global.asax file represents! In fact, this error can only be thrown from there in the current ASP.Net implementations.

First mistake: there was a Session property available in the HttpApplication object and it was immediately assumed that it is the same as Page.Session or HttpContext.Current.Session. It is about the same, except it throws an error if the underlying Session object is null.

Ok, but why is Session null? You are a smart .Net developer and you know that the Session should be available in that event. Any documentation says so! Yes, but it applies to your page, not to all the IHttpHandler implementations, like ScriptResource.axd! Also, the css and image problems occured for me only when opening the site in Cassini, not in IIS, so maybe it opens separate threads to load those resources and ignores the session or something similar, at least at that level.

Well, how does one fix it? Adding in global.asax a condition on Session not being null throws the same error, so you have to add it on HttpContext.Current.Session. In other words:
if (HttpContext.Current.Session!=null) //do stuff with sessions

Maybe this problem occurs in other places as well, but only the Session property of the HttpApplication will throw the "Session state is not available in this context." error.

The end of the world is (finally) coming!

The previous post was the 500th post in this blog! And I haven't even noticed. Let's celebrate late with news about the end of the world!

How bored can I be? I've read this article about the asteroid Apophis striking the Earth in 2029 or 2036 and my first thought was "oh man! Why so late?". I was already calculating how unfair it is that I would have to live to be 59 years old before the world ends. So I have to cope with it until then, then, close to my retirement, the pleasant moment when I get money from the state and do nothing while my mind slowly rots away, it all goes away. Then it hit me: I am a complete idiot! What was I thinking? Sheesh!

Anyway, here is a cute animation made by a guy on youtube. I personally prefer the first one, the one that is only graphics and no realism. Again, who wants real? But it wouldn't be in the spirit of the blog :) So watch the second one, the one made to satisfy the critics.

Update: the guy REMOVED (who does that?!) the videos from YouTube. I am putting another ridiculously grand video of a possible asteroid (although this seems more like a dwarf planet :) ) destruction of the Earth to satisfy the ones hungry for obliteration.

Wow, think how many blog posts I would have written until 2036!

Tuesday, January 13, 2009

Classes vs. Structs

I took a test recently, one of those asking ridiculous C# syntax questions rather than trying to figure out if your brain works, but anyway, I got stuck at a question about structs and classes. What is the difference between them?

Credit must be given where it is due, I took the info from a dotnetspider article, by Dhyanchandh A.V. , who organised the answer to my question very well:
  • Classes are reference types and structs are value types. i.e. one cannot assign null to a struct
  • Classes need to be instantiated with the new keyword, structs need only be declared
  • When one instantiates a class, it will be allocated on the heap.When one instantiates a struct, it gets created on the stack
  • One works with the reference to a class, but directly with the struct
  • When passing a class to a method, it is passed by reference. When passing a struct to a method, it’s passed by value instead of as a reference
  • One cannot have instance Field initializers in structs
  • Classes can have explicit parameterless constructors. Structs cannot
  • Classes support inheritance. But there is no inheritance for structs, except structs can implement interfaces
  • Since struct does not support inheritance, the access modifier of a member of a struct cannot be protected or protected internal
  • It is not mandatory to initialize all fields inside the constructor of a class. All the fields of a struct must be fully initialized inside the constructor
  • A class can declare a destructor, while a struct cannot

What is the purpose of a struct, then? It seems to be only a primitive type of class. Well, it serves purposes of backward compatibility with C. Many C functions (and thus COM libraries) use structs as parameters. Also, think of the struct as a logical template over a memory location. One could use the same memory space of an Int32 under a struct { Int16 lo,hi }. Coming from an older and obsolete age, I sometimes feel the need to just read the memory space of a variable and be done with it. Serialization? Puh-lease! just grab that baby's memory and slap it over someone else's space! :)

Monday, January 12, 2009

OutOfMemoryException when working with StringBuilders and strings

One of our sites started exibiting some strange behaviour when adding a lot of strings to a StringBuilder. The error was intermittent (best kind there is) and the trace showed the error originating from the StringBuilder class and then from within the String class itself (from an external method).

On the web other people noticed this and one possible explanation was that strings need to be contiguous and thus they cannot grow bigger than the largest free contiguous memory block. Remember defragmentation? Heh.

In order to test this, I added a letter to a StringBuilder, then added itself to it for a few times to see where it breaks. It broke at a size of 2^27 (134,217,728 = 0x8000000)! At first I thought it was a StringBuilder bug, but getting sb.ToString() then adding to it a letter resulted in an error. Then I thought maybe it is a default size that, for whatever reason, is considered the maximum string size. That would suck. I don't usually need 134Mb of string, but what if I do? I have 2.5Gb of memory in this computer. But no, people reported the same problem but with other powers of 2, like 29 and on a Vista computer I got 2^28.

Is it from the fragmentation of memory? Right now I have only 1.8Gb in use. I rather doubt that in the 700Mb of space left there is only one 134Mb contiguous memory block. But I cannot prove it one way or another. My guess is that there is another mechanism that actually interferes with this and effectively limits the maximum string size.

But what does that mean, anyway? For practical purposes it means that you have to plan not to have strings that big in your applications. Creating a custom string builder might work, but it would have to use some other methods than strings.

I have tried the same thing with byte arrays. While declaring a byte array of 2^28 was possible (probably also because a string uses Unicode characters internally and thus takes twice the memory) writing it to a MemoryStream resulted in an error.

So watch these things out, try to always keep single variable blocks to manageable sizes.

Friday, January 09, 2009

Visual Studio slow in source mode [Solved]

It has been a pain in the ass for me to use the graphical designer in Visual Studio. Instead I have used writing the markup of web pages and controls using the keys. It went several times faster, but still, it lacked the speed of any text editor I have ever seen. Moving up, down, left, right with the keys would make the system lag, jerk, etc. It was never too annoying to investigate until today.

What happends is that whenever you work in a VS window, it sends events to just about everything on the screen. The more windows you have open, the more it lags. And the culprit for this particular problem: the Properties window. Every time I was moving with the keys it tried to update itself with the information of the object I was moving over. Closing the Properties window fixed it! \:D/

Avalon - Bryan Ferry & Roxy Music

I heard a bit of this song in a super market and remembered it and couldn't get it out of my head. The funny thing is that when I listened to it properly, it didn't sound so good as I remembered it... Is there another version or is my memory playing tricks on me?

Anyway, here it is, British singer Bryan Ferry playing with his band Roxy Music.

Creating Dynamic User Controls with ViewState _from_ ViewState

I will write a really short post here, maybe I'll complete it later. I had to create some controls dynamically on a page. I used a ViewState saved property to determine the type of the control I would load (in Page_Load). It all worked fine until I've decided to add some ViewState saved properties in the dynamic controls. Surprise! The dynamically created controls did not persist their ViewState and my settings got lost on postback.

It's a simple google search away: dynamically controls created in Page_Load have empty ViewState bags. You should create them in Page_Init. But then again, in Page_Init the page doesn't have any ViewState, so you don't know what control type to load. It seemed like a chicken and egg thing until I tried the obvious, since the ViewState is loaded in the LoadViewState method, which is thankfully protected virtual, why not create my control there, after the page loads its view state? And it worked.

Bottom line:
protected override void LoadViewState(object savedState)

Thursday, January 08, 2009

Scrum and XP in short

First of all, I seem to be the proverbial man who can't do it so he teaches it. I've not worked in a Scrum or XP environment, but I did read a few books about them and this is what I gathered. I beg of you to point out any mistruth or inconsistency. You might want to take a look at this previous post, more general post, on the matter of agile development.

Some key elements of all agile methods I've read about are:
  • the code does not belong to any programmer, in other words anyone can change any piece of code in order to solve an issue
  • the members of the team are interchangeable, so not a bunch of experts in different fields, but people that can do all things (and be easily replaced by people just as agile as them :) )
  • the members of the team must have similar competencies, one cannot do pair programming between a rookie and a senior, for example. That is called teaching :)
  • the client is supposed to change their mind often and unpredictably, one plans for the unplannable
  • the client must be represented in the agile team, so as to not have delays or misunderstandings in requirements


The Scrum system does seem to be more of a disciplined way of developing than a method in itself. There are Scrum principles that must be upholded, but if you ignore them, the whole system looks like this:

  • All development is done in fixed time increments called Sprints. Scrum specifies 15 or 30 days, although I bet most dev companies actually plan this on a calendaristic month.
  • At the start of each Sprint a meeting of 8 hours takes place (so the first day) in which half of it is to present the requests by the Product Owner (in our case that would be either the client or the person that did the analysis) and the other half to plan which of the tasks in the Project BackLog (requirements list) can be done in the current Sprint. This last part if the responsability of the Team (that would be the developers and their team leaders and managers).
  • In the last day of the Sprint two meetings will be held: a 4 hour meeting that will allow the Team to present what was done in the current Sprint to the Product Owner (this would be an informal meeting that "is intended to bring people together and help them collaboratively determined what the Team should do next") and a 3 hour meeting in which the ScrumMaster (the person in charge with the implementation of Scrum in the project) "encourages the Team to revise, within the Scrum process framework and practices, its development process to make it more effective and enjoyable for the next Sprint"
  • The development is one in the rest of 28 days
  • Each day there is a 15 minute Scrum Meeting held within the Team in which "each Team member answers three questions: What have you done on this project since the last Daily Scrum meeting? What do you plan on doing on this project between now and the next Daily Scrum meeting? What impediments stand in the way of you meeting your commitments to this Sprint and this project? The purpose of the meeting is to synchronize the work of all Team members daily and to schedule any meetings that the Team needs to forward its progress".

What is important about these Sprints is that at the end of each sprint the product should be fully implemented, tested and ready for production. At each increment the client could just take the product and leave. Any changes to the specifications must be included in the backlog and prioritised so that the developers apply them in the next Sprints. Once a Sprint is planned, there are no changes to it.

So, as far as I understand, this is a method of making rigid planning for very small periods of time, then executing it, effectively reducing each project to a bunch of smaller ones. Instead of "Make me a business management application" there will be projects like "Make me a member management interface", then "Add activities management" and so on. It reminds me of the time when I wanted to learn in college and I would divide the number of pages I had to understand and memorize to the number of days remaining till the exam.

I don't consider Scrum a very innovative way of development, although back in 1986 it probably was, but that's also good. One can easily adapt some of these ideas to their own system of development. By allowing the developer to build a finite number of things in a predetermined time, they can select a time to test the application in which they are certain no more requests will delay that process. Of course, I don't know what happends if the client changes their mind about a thing that is supposed to be done in a Sprint. Do we abandon the task in the current Sprint and plan it modified in the next? Do we build it as if nothing happened, then start making the changes or, worse, remove it?

XP (Extreme Programming)

The Extreme Programming development method seems to have the same roots as Scrum does. The idea is to develop in successive iterations that encapsulate planning, testing, development and refactoring. The "12 principles" of XP are again and again mentioned in the book, but I think that's crap. The most important ideas in XP, to me at least, seem to be :
  • User stories as requirements gathering; Most important! a detailed story of what the user will do and why, like a narrative, the Word version of an UML flow diagram, which is the responsability of the client! The actual developing is the implementation in code of those stories
  • iterations, which in the case of XP don't have a specific time length, each one is planned depending on what there is to do and what can be done
  • the separation of user and client, the user is the one that actually uses the program, while the client... well, you know
  • user-on-site, you can always ask the user what they think and receive quick feedback
  • Test driven development, which, together with pair programming, seem the only actual extreme parts of XP, where they insist on tests first, programming later.
  • Spikes: small bursts of programming for no other reason than to research an idea. Developers don't have to be rigurous in spike programming, since they only do the bit of code, test its functionality, then throw it away, the idea being that they learn how to do the actual code they wanted to do and what problems they might be facing. In this particular case, the spike is part of the planning or designing of a piece of code.

I will mention here Pair Programming as well, although I clearly don't see it happening. The idea is that two programmers sit on the same machine, one programs, while the other does just-in-time code review and thinks of the large implications of the code. While the concept is sound and I seldom find myself wanting to be able to code and also think in a larger context, I don't see how this can be done anymore than a master painter could get help from a second one that watches from afar and keeps nagging him on how to do things. Besides, sitting near a code that is being written sounds both boring and terribly frustrating.

But then again, I always like talking to other programmers that are as passionate as I am, so maybe a hands-on discussion, even an argument, might provide the drive to good code. Besides, it is harder to waste time on news sites and online games when you have some guy next to you :)


My conclusion is that agile is a solution to the problems that arose during the Waterfall days. It is not a solution to all problems and it certainly presents some level of difficulty in implementation.

I believe it would be hard to do in a small team with high turnover. One needs a stable team that works well together and has a decent management to implement agile development. But I do see it as a positive thing, as it puts the needs of the customer first and, no matter how good a coder you are, your primary goal is to satisfy the client.

i=i++ - The trials and tribulations of the C incrementer

Here is a point raised by Tudor, from the infamous Romanian blog Incidentally, he does some teaching in the Java field and is a good web designer and PHP programmer.

Ok, some of you know those informatics teachers that start talking about a programming language by giving you a silly problem that would never occur in real life or by asking you to "decypher" a piece of code that looks unusable in any scenario. But bare with me and try to think this through before you read on in the post.
Question: what is the value of i (initially 0) after the following operations in C#?
  • i = i++
  • i = Math.Pow(i++,2)
  • some method that ends in return i++

First, let's think about the meaning of this ++ arcane symbol. It means increment a number, or add 1 to it. In C based languages, you can use it either after or before a variable, thus changing meaning to add 1 to i after or before assignment. As MSDN says: "The increment operator (++) increments its operand by 1. The increment operator can appear before or after its operand:
++ var
var ++
The first form is a prefix increment operation. The result of the operation is the value of the operand after it has been incremented.
The second form is a postfix increment operation. The result of the operation is the value of the operand before it has been incremented."

Now the answer is pretty clear: i will be zero after any of the operations described above. But why?! Let's examine them a little.

The first makes no sense in real world, but you could easily imagine something like i=j++ that could be used somewhere and that makes sense to set i to the original value of j, then increment j. But then doesn't it mean that i should be 1 because it gets incremented after the assignment? Well I think it should, as the last operation, but what I think happends is that the value for i gets pushed in a stack, then retrieved at the end of the sentence like this:
  i = i
push 0 to stack as the value of i
push 1 to stack as the value of i
pop value of i from stack (1)
pop value of i from stack (0)

Ok, ok, I guess that makes some sort of sense, but what about that int F(int i) { return i++; } thing? Shouldn't it increment i after the operation then return it? Apparently not. The method returns the value of i and aborts the pending increment operation.

According to Tudor, PHP would return 1 in these situations, although most C implementations, including javascript, return 0. Update: he later posted a comment retracting that statement. He also suggested it would be hard to debug something like this in case it happends. Ha! My beautiful ReSharper Visual Studio addon immediately added a wiggly line under i and said value assigned is not used in any execution path. ReSharper - Computer teachers : 1-0 ! :)

Tuesday, January 06, 2009

Serializing objects in .Net

This was something I have been meaning to write for quite some time, but actually, I've never had to work with a proper serialization scenario until recently. Here is goes:

First of all, whenever one wants to save an object to a string they google ".Net serializer" and quickly reach the XmlSerializer because that's what most people think serialization is. But actually, it is not. The whole point of serializing an object is that you can transfer and store it. Therefore you need to use a format that is as open, clear and standard as possible and to send only the relevant data, which in case of objects is the PUBLIC data. And for that, the XmlSerializer does its job, albeit, it does have some problems I am going to describe later.

But suppose you didn't really want to send mere data over to another computer, but an entire class, with its state intact, ready to do work as if the transfer never happened? Then you need to FORMAT the object. Enter the IFormatter interface with its most prominent implementation: BinaryFormatter. Funny enough, the methods used to spurt an object through a stream are also called Serialize and Deserialize. The advantages of the IFormatter way is that it is saving the entire object graph, private members included, and doesn't need all the requirements the XmlSerializer does. It also produces a smaller output. So, is this it? Why use Xml (which everybody secretly hates) when you can use the good ole obscure binary file with almost no trouble? Well, because of the almost. Yes, this way of doing things is not fullproof either.

Some people feel that the sending only the data is not serialization, and that the saving of the completele graph and internal state of the object is. Wikipedia says: "serialization is the process of converting an object into a sequence of bits so that it can be stored on a storage medium (such as a file, or a memory buffer) or transmitted across a network connection link. When the resulting series of bits is reread according to the serialization format, it can be used to create a semantically identical clone of the original object.". So, they bail by using the obscure phrasing of "semantically identical", which pretty much says "they mean the same thing even if their structures may differ". So, I think I am in the right, as the BinaryFormatter has real issues with structure change.

Now for the quick and dirty reference:
The XmlSerializer
  • Only serializes public READ/WRITE properties and fields - it doesn't throw any error when trying to serialize readonly properties, so be careful
  • Needs the class to have a parameterless constructor - this pretty much restricts the design of the classes you can serialize
  • Does not work on Dictionaries
  • Does use a Type definition to serialize and deserialize, which means you can still use it if the types are named differently or of different versions, even if they are radically different, as it will only fill the values that it stored and not care about the others
  • There are all sorts of attributes one can decorate their classes with to control serialization as well as some events that are fired during deserialization
  • Has issues with circular references
  • If your class implements IXmlSerializable it can control how the serialization is done

The BinaryFormatter
  • It serializes both public and private, readonly or read/write properties and fields as long as their type classes are marked as Serializable - that sucks for classes that are not yours
  • It's a rigid method of serializing objects - if you change the source or destination objects or even their namespace, the deserialization won't work

The SoapFormatter
  • Just when I thought that a class that combines the benefits of both BinaryFormatter and XmlSerializer exists, it appears it has been obsoleted in .Net 3.5. Besides, it did far less than the BinaryFormatter

It seems that Microsoft's idea of serialization blatantly differs from mine. I would have wanted a class that can serialize binary or Xml based on a simply property, send public OR both types of fields and properties, be flexible in how decorating attributes are used and what the output is. In my project I had to switch from BinaryFormatter, which seemed to solve all problems, to XmlSerializer (thus having to change a lot of the classes and design of the app) just because the type of the class sent by the client application could not have the same namespace as the one on the server.

That doesn't mean one cannot build their own class to do everything I mentioned above, of course. Here are some CodeProject examples:
A Deep XmlSerializer, Supporting Complex Classes, Enumerations, Structs, Collections, and Arrays
AltSerializer - An Alternate Binary Serializer.

Update: the .Net framework 3.5 has added an object called JavaScriptSerializer which turns an object into a single line of text, JSON style. It worked great for me in order to log hierarchical or collection based data. Use it just like the XmlSerializer.

Another link to check out is this one: Fast Serialization, but read the entire article before using any code.

Monday, January 05, 2009

Happy New Year!!! [Party trompet and silly face]

Well, I am alive and blogging. It is a new year, one that brings as much hope and fulfilment as the last one (lots of hope there!), the big 2009. I can vaguely remember a kid that computed his age for the year 2000 and thought "I will be old enough to go to Mars!", but apparently, no human is old enough yet.

So what am I planning this year? Getting back on track would be a good idea. Stop wasting time that I don't have and if I have and waste, then I don't deserve. My book? Ahem. Let's hope I get inspired beyond the mere autobiographic. My AI MMORPG WMATCL project? I still have to design an AI that is worthy of its name. My job? Well, it's still there. I find myself wondering why? from time to time, but I guess it is good to have a job in this troubled time. My blog? Well, I intend to spice it up, but I need to actually do interesting stuff for that. I will update it with info gathered from a new Windows Forms application that I am building as well as information about the ReportViewer control that I've finally managed to use and to love/hate. My personal life? I have reached that point that many people find themselves at without really understanding how they got there. I've made the compromises that make one accept their life "as is" and postpone who they are. Sometimes that "myself" I have imprisoned deep inside growls and pulls on the bars. But maybe he's there for life (pun intended). Then again, maybe not. He feels more and more like a stranger now.

Oi! What's with the depressed text!? Forget all that! It's a new year! Happy new year!!! [Party trompet and silly face]